Hitch Adapters
1 1/4" to 2" Adapter
- This Converts a 1 1/4" Receiver to a 2" Receiver
- One Piece Design
- Only To Be Used For A Cargo Carrier or Bike Rack
|
|
1 1/4" to 2" Adapter with 5" Rise
- This Converts a 1 1/4" Receiver to a 2" Receiver
- Extends 6 1/2" with a 5" Rise
- PLEASE VERIFY THAT THIS WILL FIT INTO YOUR HITCH WITHOUT ANY INTERFERENCE - The Rise Starts 3" From Center of Pin
Hole in Trailer Hitch
- One Piece Design
- Only To Be Used For A Cargo Carrier or Bike Rack
|
|
2" to 1 1/4" Adapter
- This Converts a 2" Receiver to a 1 1/4" Receiver
- One Piece Design
- Only To Be Used With A Cargo Carrier or Bike Rack
|
|
2" to 1 1/4" Adapter - 7" Long
- This Converts a 2" Receiver to a 1 1/4" Receiver
- One Piece Design - 7" Long
- Only To Be Used With A Cargo Carrier or Bike Rack
|
|
2" to 1 1/4" Adapter - 14" Long
- This Converts a 2" Receiver to a 1 1/4" Receiver
- One Piece Design - 14" Long
- Only To Be Used With A Cargo Carrier or Bike Rack
|
2" to 1 1/4" Adapter - 18" Long
- This Converts a 2" Receiver to a 1 1/4" Receiver
- One Piece Design - 18" Long
- Only To Be Used With A Cargo Carrier or Bike Rack
|
2 1/2" to 2" Adapter
- This Converts a 2 1/2" Receiver to a 2" Receiver
- One Piece Design
|
|
2 1/2" to 2" Adapter WITH Collar
- This Converts a 2 1/2" Receiver to a 2" Receiver
- The Collar Makes It A Snap To Lineup
|
|
3" to 2 1/2" & 2" Adapter
- This Is A 2 Piece Set
- 1st Piece Set Converts 3" Receiver To 2 1/2"
- 2nd Piece Set Is Added To Reduce to 2" Receiver
|
|
3" to 2" Adapter
- This Converts a 3" Receiver to a 2" Receiver
|
|
HD 3/4" Pin & Clip For 3" to 2" Adapter listed above - DT-38735
- This IS The Required Pin & Clip For the Above Listed a 3" Receiver to a 2" Adapter
|
|
Anti-Rattle Products
Anti-Rattle Device
- Brophy 2" Receiver Stabilizer
- Easy To Use, Simply Tighten The Two Wing Knobs
- Needs 1" of Clearance to Mount
-
|
|
Clamp Plate & U-Bolt
- Easy To Use, Simply Tighten The Two Nuts
-
|
|
Quiet Hitch
- Quiet Hitch eliminates any free play between the receiver and the tow bar (or bike rack, ball mount or whatever you insert) for a solid, seamless
connection
- Consistent pressure keeps your towing combination tracking straight through crosswinds, curves and sudden maneuvers � all with considerably less effort
on your part
- Quiet Hitch also reduces tire wear, as well as wear and tear on the hitch and the receiver by eliminating free play
- Especially effective on towing combinations with multiple hitch extensions; also reduces rattle caused by bike racks or hitch accessories
- Bolts on in seconds
For 1 1/4" Receiver
|
For 2" Receiver
|
For 2 1/2" Receiver
|
|
|
Draw-Tite J-Pin
- It Is Both A Lock and Anti-Rattle Device
- Designed for the New Style Draw-Tite 2" Receivers with the Extra 17/32" hole
- Attachment Wrench Included
|
|
Trimax Tightening Hitch Pin with Lock
- It Makes The Ball Mount/Receiver Connection Completely Rigid
- Protect Your Investment by Keeping It Locked
- Chrome-Plated Hardened Steel
- Round Key. Wont break like Flat Keys.
- Watertight Cap Seals Out Moisture and Dirt, Preventing Corrosion
- For Use with Any 2" Hollow Ball Mount
|
|
